What are the BenQ RL2755HM best settings for PS4?


You can also be interested in these:


The BenQ RL2755HM monitor is one of many great gaming monitors that BenQ has released, and it works not only for PC gaming, but also for console gaming. However, to get the most out of it when playing on consoles such as PS4 or Xbox, it is necessary to tweak it a bit and configure further the defaults because this parameters are more focused on playing on PC.

Many users have difficulty finding the right settings on this monitor to play on a PS4. If this is the case, keep reading as we bring you the best settings to play on PS4.

Some facts about the BenQ RL2755HM monitor

First of all, to familiarize ourselves a little with this equipment, it must be said that the BenQ RL2755HM Gaming Monitor is one of BenQ’s hybrid gaming monitors. It measures about 27 inches and has a 1080p (1920 × 1080) resolution screen with a GTG response time of 1 ms without lag.

The monitor is practically black and has 0.5-inch ridges on the edges of the screen, plus it has a handy rubber mount that can be used to place your game console controllers when you’re not using them.

The BenQ RL2755HM has dimensions of 8.4x 25.2x 18.8 (LWH) and weighs only 12.1 pounds. This monitor has a TN panel and a 20,000,000: 1 contrast ratio which is on the high end for this display panel.

It has quite good viewing angles compared to the standard TN panel monitor. The monitor can also be tilted five degrees forward and 15 degrees back if desired, although it doesn’t have one. height adjustment.

What are the best BenQ RL2755HM settings for PS4?

The following settings respect the quality of the video game as well as the response time of the BenQ RL2755HM monitor. Perhaps you should also take it into account if you plan to purchase a monitor of this brand and model.

Settings 1

In this first option, you simply have to access the configuration of your BenQ RL2755HM monitor and set the parameters that we specify below:

  • Brightness: 100
  • Contrast: 50
  • Sharpness: 10
  • Black equalizer: 20
  • Color temperature: Red 100 Green 100 Blue 99
  • Reset color: No
  • AMA: high
  • Instant mode: on
  • Senseye demo: disabled
  • Dynamic contrast: 0
  • Overscan: disabled
  • Display mode: full
  • HDMI RGB PC range: 0-255
  • PS4 – Settings > Sound and screen > Video output settings> RGB range: Full
  • Xbox – Settings > Display and sound > Color space: PC (full RGB)

Settings 2

Another option would be the following:

  • Display mode: Standard
  • Brightness: 85
  • Contrast: 50
  • Sharpness: 3
  • Black equalizer: default
  • Gamma: 3
  • Color temperature: for each R / G / B): 100
  • Black equalizer: default
  • Blue light: default
  • PS4 – Settings > Sound and screen > Video output settings > RGB range: Full
  • Deep color output: Off

Settings 3

Our third and final configuration option for BenQ RL2755HM for PS4 is this:

  • Brightness: 70
  • Contrast: 50
  • Sharpness: 5
  • Black equalizer: 15
  • Color vibrations: 13
  • Blue light: 0
  • Color temperature: Red 98, Green 99, Blue 98
  • Reset color: No
  • AMA: high
  • Advanced imaging: RTE and RTS
  • Instant mode: on
  • Dynamic contrast: 0
  • Overscan: disabled
  • Display mode: full
  • HDMI RGB PC range: 16-235

We hope that you find these configurations useful, which after trying all different combinations under the sun, we came out with these 3 sets with the best results. However, you can always adjust the settings to your linkings or fine-tune at will.


More stories like this


Leave a Comment